Tips For Connecting a Laptop LCD Screen To the AVDS Cable

Tips For Connecting a Laptop LCD Screen To the AVDS Cable

Laptop LCD Screen is very essential to check whether the laptop works effectively or not. It is for sure one of the most important device used in a laptop and you would have to carry out the extensive testing properly with all the cables connected correctly. Some people believe that the LCD screen is just another component of the main computer unit but this is not true at all. These are just tiny electronic components that provide us bright images on our computer monitor display monitor.

Laptop LCD Screen

If the image is not displayed properly then it’s the time when you buy a new lcd panel for your laptop lcd screen. There can be many reasons for the failure including the malfunctioning of the laptop lcd screen, the bad cables, the warping of the external monitor screen and the lightning. All these issues can easily be solved with some basic technical knowledge and a few minutes of your time.

There can be two problems of the LCD panel, which can result in dead spots on the screen and the connector pins. The first problem can be resolved by simply pulling the laptop lid open. You should make sure that the screw is tightly fixed on the plastic frame of the laptop lid and then you can remove it. The second problem can be solved by checking the compatibility of the screws with your specific model. If you find them to be working properly then replace them with the new ones.

After removing the screws and the plastic frame, you will find that the power and audio cables are securely attached with a nylon shield to the back of the lcd panel. Now attach the cables to the output jacks using the appropriate screws. Again, if you find them to be working properly, replace them with the new ones. Then remove the power adaptor cable and the other cables. You will find that all the cables are connected with the mounting clips on the back of the laptop.

After doing all this, you can close the laptop and then disconnect the AC power cord from the wall. You will find that the AC power cord is firmly attached to the wall. The other cables are attached to the inverter. It is better to use the longer wires for the inverter, whereas the shorter cables are used for connecting the LCD screen and shelves cable.

Now you need to connect the inverter to the laptop. You should use the longer cable for the inverter and the shorter cable for the web cam. This may not sound very important at first, but when you connect the inverter to the web cam goes on full volume, the laptop begins to suck the power supply from the mains. You should also ensure that the two devices are not too far away from each other. Otherwise, the connection may become a little weak and you may have to replace the web cam with a new one.

Leave a comment