Raspberry Pi Pico Improvement Board A Low-Value Excessive-Efficiency Microcontroller Board RP2040 Cortex-M0+ Twin-Core ARM Processor

Raspberry Pi Pico Improvement Board A Low-Value Excessive-Efficiency Microcontroller Board RP2040 Cortex-M0+ Twin-Core ARM Processor

Introducition:

The Raspberry Pi Pico is a microcontroller board primarily based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with versatile digital interfaces. The Raspberry Pi Pico options two ARM Cortex-M0+ cores run as much as 133MHz; 256KB RAM; 30 GPIO pins; and a broad vary of interfacing choices. That is paired with 2MB of onboard QSPI Flash reminiscence for code and knowledge storage.

Along with highly effective {hardware} assets, Pico has wealthy and full software program help and neighborhood assets. It comes with a whole Rasberry Pi official C/C++ SDK, Micropython SDK. Simply click on “https://pico.raspberrypi.org/getting-started” to get began with Raspberry Pi Pico.

Pico has been designed to make use of both soldered 0.1″ pin-headers (it’s one 0.1″ pitch wider than a typical 40-pin DIP package deal) or can be utilized as a surface-mountable ‘module’, because the person IO pins are additionally castellated. There are SMT pads beneath the USB connector and BOOTSEL button, which permit these indicators to be accessed if used as a reflow soldered SMT module.

Specification:

• RP2040 microcontroller chip designed by Raspberry Pi in the UK

• Twin-core Arm Cortex M0+ processor, versatile clock working as much as 133 MHz

• 264KB of SRAM, and 2MB of on-board Flash reminiscence

• Castellated module permits soldering direct to service boards

• USB 1.1 with system and host help

• Low-power sleep and dormant modes

• Drag-and-drop programming utilizing mass storage over USB

• 26 × multi-function GPIO pins

• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels

• Correct clock and timer on-chip

• Temperature sensor

• Accelerated floating-point libraries on-chip

• 8 × Programmable I/O (PIO) state machines for customized peripheral help

Packing checklist:

1 X Raspberry Pi Pico Microcontroller Board Improvement Board
2 X 40 PIN Connector

Extra Informaiton:

You may get extra data for the Raspberry Pi Pico by this hyperlink:

https://pico.raspberrypi.org/getting-started/