LP03 Docking Station, Light-weight and Transportable Video Transmission Converter Appropriate for Floor Laptop computer 2/3

LP03 Docking Station, Light-weight and Transportable Video Transmission Converter Appropriate for Floor Laptop computer 2/3

1. The best decision is 3840X2160P/30HZ (requires the help of the show host), and likewise helps 1080p/23.98/24/50/59.94/60HZ, 1080i/50/59.94/60HZ, 720p/50/59.94/60HZ, and so on.
2. Assist HDCP2.2; USB3.0A/F helps a most present of 1A and a most fee of 5Gbps; Backward suitable with USB2.0/1.1
3. Constructed-in conversion chip, plug and play; Working temperature: 0~70℃
4. Working humidity: 10% to 85% RH (non-condensing)
5. Storage temperature: -10~70 ℃; Storage humidity: 5% to 90% RH (non-condensing)

Directions and precautions
1. Affirm whether or not the monitor decision can meet the corresponding necessities earlier than use
2. Insert the HDMI cable into the HDMI enter port of the monitor, and join one finish to the HDMI F port of the docking station
3. Join the USB, mini dp, 3.5 audio connectors of this product to the three output ports on the left facet of SURFACE LAPTOP2
4. Right now, there will probably be a consumer interface show on the monitor
5. Insert the U disk into USB3.0A/F to understand the U disk information connection
6. Insert the charger to understand the charging operate
7. When utilizing, make it possible for the PIN needle within the product is just not sag or bent, in order to not have an effect on the insertion and elimination
8. Watch out to not splash liquid into the connector throughout use, in order to not have an effect on its efficiency
9. The product must be positioned in a dry place, not in a moist setting
measurement:10.5×3.1×0.9cm
Materials:Aluminum alloy
color:Silver

Bundle Contents:
1 x Docking station

Solely the above bundle content material, different merchandise are usually not included.
Be aware: Gentle taking pictures and totally different shows might trigger the colour of the merchandise within the image a little bit totally different from the true factor. The measurement allowed error is +/- 1-3cm.