30A/50A/60A/70A/100A Photo voltaic Cost Controller For Photo voltaic Panel Battery With Twin USB Port 12V/24V MPPT/PWM Auto Paremeter Adjusta

Description:

Characteristic：

– Superior most energy level monitoring (MPPT/PWM) expertise, the effectivity shouldn’t be lower than 99.5%. Excessive-quality parts enhance the system efficiency, and the utmost conversion effectivity is 98%. Tremendous quick monitoring pace and assure monitoring effectivity.

– Giant display LCD show, cost and discharge present show, cumulative energy era and discharge energy question, temperature show, gentle management + delay management; adjustable cost and discharge parameters, with power-off reminiscence and different features.

– Twin USB output, the utmost present is 2.5A. Geared up with all vital safety units, the management parameters of the system are adjustable, simple to arrange and function. Constructed-in overheating, overcurrent, brief circuit, open circuit safety, fault elimination, controller computerized restoration. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra- warmth.

– Constructed-in brief circuit safety, open circuit safety, reverse connection safety, overload safety. Reverse present safety, low calorific , with self-recovery operate, is not going to harm the controller.

– Actual-time show of temperature, charging present and discharge present. Present autofocus MPPT monitoring charging, excessive charging effectivity, charging course of doesn’t cease detection, two-way focus monitoring.

Specs:

Identify: LCD display photo voltaic controller

Voltage: DC 12V / 24V

Show: LCD display

Self-consumption:

Overcharge safety: 14.4V / 28.8V

Overcharge Float cost: 13.7V / 27.4V

Cost restoration voltage: 12.6V / 25.2V

Over discharge safety: 10.7V / 21.4V

Over discharge restoration: 12.6V / 25.2V

Twin USB output: 5V / 2A (cost cell phone, iPad, and so on.)

Working temperature: -35 ℃ -60 ℃

12V matches 18V photo voltaic panel, 24V matches 36V photo voltaic panel

12.0 volt lead acid battery corresponding

The float voltage is ready to: 13.6

The restoration discharge voltage is ready to: 12.6

The discharge cut-off voltage is ready to: 10.7

12.8 volt lithium iron phosphate battery corresponding

The float voltage is ready to: 14.6

The restoration discharge voltage is ready to: 13.6

The discharge cut-off voltage is ready to: 11.0

11.1 volt lithium battery corresponding

The float voltage is ready to: 12.6

The restoration discharge voltage is ready to: 11.6

The discharge cut-off voltage is ready to: 9.6

The minute is adjustable when the output is turned off, which is extra handy (there isn’t a adjustment when the market is barely obtainable).

PV system energy Description:

10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: energy is respectively 100-1000W

10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: energy is respectively 200-2000W

Bundle Included:

1X Photo voltaic Panels Battery Cost Controller

1X Consumer Guide

Notes:

1. The cost regulator is barely appropriate for lead-acid batteries: OPEN, AGM, GEL, it’s not suited to nickel hydride, lithium, Liions, or different batteries.

2. This controller can solely use photovoltaic panels as charging energy. Don’t use DC or different energy as charging energy.

3.The LCD show has an error of 0.2 V- 0.3 V, however that is regular

4. Outdated batteries could also be degraded the capability after hundereds of cycles, simply drop decrease than 8V, which leads to the controller will likely be shut off (LCD display turn out to be completely “DEAD”).

5. Indoor use solely: the working temperature of this controller is -35°C to +60°C, throughout scorching sunny days, the temperature outdoors would possibly go as much as 60-75°C. Please do maintain the controller keep in cool and well-ventilated place to take care of good warmth dissipation.