UHPPOTE 12V Energy Provide for Door Entry Management System & Intercom Digital camera (Enter: 110-240VAC – Output:12VDC)

Value: $24.00
(as of Jul 08,2022 23:56:52 UTC – Particulars)

Product Description

Introduction

This switching energy provide is specifically utilized for entry management system and might be protected robotically when there’s quick circuit, over voltage or over present. It’s of sturdy practicality, easy interface and regular efficiency.
With working present of 3A, it may possibly present electrical lock and entry controller with 12VDC regular output voltage.

Options

Indoor use solely.
Low noise design with ripple as little as 85mVp-p.
Appropriate with electrical lock, entry controller, exit push button and intercom digital camera.
Can scale back the load of entry controller and save wiring to scale back the hidden bother.
Based mostly on relay management circuit, lock time might be adjusted from 0 to fifteen seconds.
Automated safety perform for harmful conditions, akin to, overload, over voltage and quick circuit.
Safety mechanism: Energy might be disconnected quickly or the fuse might be insured robotically.
A brief circuit (circulate) safety: When the output circuit is short-circuited, will probably be robotically disconnected and can robotically return to regular state when troubleshooting.

Specs

Enter Voltage
100-240VAC

Enter Frequency
50-60Hz

Output Voltage
12VDC

Output Present
3A

Output Energy
36W

Effectivity (Typ.)
90%

Time Delay
0-15s

Enclosure Materials
Aluminum alloy

Enclosure End
Spraying

Enclosure Shade
Gray

Working Temperature
-4 to +140℉ [-20 to +60°C]

Working Humidity
10%-90percentRH

Product Weight
7.3oz [207g]

Silicone Wire Size
8″

Enclosure Dimension
4-29/64″ x 3-5/64″ x 1-17/64″ [113x78x32mm]

HBK-P01 Switching Energy Provide

Extensively utilized in entry management system and intercom digital camera
NC/NO/COM outputs, can management varied sort of electrical locks
0~15 seconds delay time adjustable
Aluminum alloy enclosure with good warmth dissipation
3A full energy load

About Enter and Output Connecting:

18AWG UL3239 silicone cable for enter connecting (Cable size: 8″)
Screw sort PCB terminal blocks for output connecting

Package deal Checklist:

HBK-P01 Energy Provide x 1
Person Handbook x 1
Plastic Anchors x 2
#7×1″ Self-Tapping Screw x 2

Enter Wiring Diagram

Output Wiring Diagram

Worldwide voltage enter 110 – 240VAC.
HBK-P01 switching energy provide is specifically used for entry management system and Intercom Digital camera.
With working present of 3A, it may possibly present electrical lock and entry controller with 12VDC regular output voltage.
This machine adopts rotary timmer potentiometer which have wonderful efficiency makes the delay time extra correct.
Remarks: Opening time should set to 0 second when connecting with electrical managed lock. In any other case electrical bolt lock can be Burned Down.