FYSETC Ender 3 S1 Professional Mattress Spring Metal Sheet with PEI Magnetic Base Versatile Construct Floor Heated Mattress Cowl 235x235mm/ 9.2×9.2 inch for Ender 3X / Ender 3 Professional/Ender 3 V2/Ender 5/ Professional 3D Printer Elements

Worth: $25.49
(as of Jul 10,2022 07:51:42 UTC – Particulars)

Characteristic: PEI Sheet Use:
Thickness: about 0.17mm
Appropriate with PLA ABS PETG TPU and different most filaments.

The Polyetherimide sheet comes with robust adhesive already laminated to the PEI.
Degree the mattress and set the peak of the nozzle earlier than printing.

When the print is accomplished, let the mattress cool, and the half will likely be simple to launch from the PEI floor. Elements are literally simpler to take away if launched earlier than the mattress turns into utterly chilly.

Magnetic Base:
Magnetic base that’s adhesive-backed for simple set up

PEI Sheet Upkeep:
Acetone can be utilized as an alternative of isopropyl alcohol, or metal wool pads with detergent, however the mattress should be chilly if acetone is used. Optionally, gentle sanding with 600-1000 grit sand paper might be accomplished after plenty of printing to provide the PEI sheet extra life.

Package deal Consists of:
1X 235mm Metal Spring with PEI
1X 235mm Magnetic sticker B facet

Package deal Dimensions ‏ : ‎ 14.48 x 10.75 x 0.75 inches; 1.04 Kilos
Date First Out there ‏ : ‎ March 30, 2020
Producer ‏ : ‎ Fuyuansheng
ASIN ‏ : ‎ B086JP8KB4

Heated Mattress Cowl for Ender 3 and different 235 printing mattress 3D printer. Customized PEI supplies to make your print simple to stick to the printing floor, versatile, detachable.
Dimension: 235*235mm/ 9.2*9.2 inch, for Ender 3, Ender 3 Professional Ender 3X, Ender 3 V2, Ender 3 S1, CR-20 Professional, Aquila X2, Neptun 2/2S/2D/X/3 Sizzling Mattress
Our magnetis and movies have all been formulated to withstand excessive temperature, so you possibly can warmth your mattress to excessive temps for specialty filaments and never fear about lack of efficiency.
Straightforward to make use of, please tear off the again paper from magnetic base and sitck it to your heated mattress, then align the metal plate on it. The facet with PEI is upside to print on. Carry out a one-time z-height adjustment to maintain the mattress degree. Please thoughts the gap between the nozzle and pei floor to keep away from scratching. Earlier than printing, please take away the protecting movie on the PEI floor. When full printing, let the plate settle down, then merely take away the prints.
Kindly Ideas: Now we have sticked PEI on the metal plate by machine, so that you needn’t fear about bubbles. in case you acquired package deal however discovered the air bubbles or Scratches, please don’t be concerned, they’re the floor layer, PEI won’t be affected.