Blacklight LED Wave Ripple Flicker Particular Results Lighting equipment for Props Surroundings Fluorescent Paints 12 Volt DC

Worth: $20.99
(as of Jul 06,2022 10:28:52 UTC – Particulars)

This unit is an expert blacklight LED wave ripple flicker simulation gentle supply for quite a lot of makes use of, together with constructing props, surroundings and costumes. The equipment will run for greater than 12 hours with 8 new AA batteries (not included). The cable socket meeting might be made to suit into inflexible foam, wooden or different materials (requiring 7/16” diameter gap). The taper of the socket physique locks it into place, and the socket has a entrance flange to restrict the insertion depth and supply a completed look. The controller has three buttons that regulate the WEC (Wave Results Management) capabilities: Velocity, Mild, and Mode: First, the Velocity button doubles because the on/off change. It additionally adjusts how shortly the sunshine modifications within the dynamic results mode and the precise stage of sunshine within the static dimming mode. To show the unit off, the Velocity button should be held longer than 3 seconds. When turned again on, the controller resumes the settings final used. The Velocity button offers 12 gentle stage choices within the static dimming mode and 20 pace choices within the dynamic results mode. Second, the Mild button begins the static dimming mode, which provides 12 totally different, mounted intensities of sunshine. It permits the sunshine to be as dim or shiny as desired. Third, the Mode button initiates the dynamic results mode. Along with additionally offering the static dimming mode, this mode provides six dynamic results: 1. Wave / Ripple (Shallow) 2. Wave / Ripple (Storm) 3. Wave / Ripple (Common) 4. Wave (Tough Surf) 5. Wave (Storm Swells) 6. Wave (Deep Swells). 7. Static dimming. At quicker speeds a flickering flame impact can be achieved. This equipment consists of three objects: a Wave Results Management, a bulb and cable socket meeting, and a 12-volt battery holder (which homes 8 AA batteries). The LED lamp bulb consists of 24 LEDs in clear silicone rubber, utilizing ultraviolet UV-A 390nm to 395nm nominal wavelength peak. Purposes: Costumes Blacklight artwork Escape rooms Lantern props
Designed to be used in darker settings. To not illumine with purple glow however supposed to make fluorescent objects themselves gentle up whereas preserving every little thing else darkish. Makes fluorescent supplies eye-catching and brighter than itself
Optimized to cut back its personal seen gentle and make fluorescent supplies glow, similar to paints, plastics or pigments, in low-light stage settings and darker atmosphere
Controller offers wave ripple and flicker results with 6 totally different dynamic modes with 20 pace steps every. Can imitate water and flame results. Remembers final setting used when turned on once more
Simple to function, runs on 8 AA batteries (batteries not included, use AA alkaline batteries). May be operated from 12-volt DC energy provide. Contains blacklight bulb, cable socket, management, and battery holder meeting
Detachable Bi-Pin bulb homes 24 mini UV LEDs in clear silicone rubber molded bulb, with bulb top of 1-1/8” and diameter of ½”, emitting UV gentle, 390-395nm wavelength. Cable socket meeting with bulb has general size of 11-1/2” and might be made to suit into numerous prop, craft, or surroundings supplies